How to Make Liquid Soap
In this detailed guide, we’ll walk you through the process of making liquid soap. Whether you’re interested in crafting it for personal use or considering selling it, we’ve got you covered. Liquid soap is a versatile product that finds its place in every household, making this knowledge valuable. Let’s dive into the world of liquid soap making step by step.
ADVERTISEMENT
Ingredients:
To create your own liquid soap, you’ll need the following ingredients:
ADVERTISEMENT
| Ingredients | Quantity |
|---|---|
| Caustic Soda | 2 tablespoons |
| Nitrosol | – |
| Soda Ash | – |
| STPP (Sodium Tripolyphosphate) | – |
| Laurel Rice (Sodium Lauryl Sulfate) | – |
| Texapon | – |
| Sulphonic Acid | – |
| Formalin | 3 tablespoons |
| Foam Blaster | – |
| Color | – |
| Perfume | – |
| Water | 30 liters |
Please note that these quantities are for making 30 liters of liquid soap. If you require a smaller or larger batch, you can adjust the measurements accordingly.
ADVERTISEMENT
Instructions:
Let’s break down the process step by step:
- Caustic Soda Preparation
- Mix caustic soda with 1 liter of water. Stir it thoroughly and set it aside.
- Soda Ash Preparation
- Mix soda ash in 3 liters of water, ensuring there are no lumps. Stir well to achieve a smooth mixture.
- STPP Preparation
- In another bucket, mix STPP in 3 liters of water. Stir until it dissolves completely.
- Laurel Rice (SLS) Preparation
- Mix Laurel Rice (SLS) in 3 liters of water and stir until well combined.
- Texapon and Sulphonic Acid
- In a separate container, mix Texapon and Sulphonic acid until they are fully dissolved. No additional water is needed for this step.
- Allow Chemicals to Dissolve
- Leave all the mixtures (1, 2, 3, 4, 5) for 20 to 30 minutes, allowing the chemicals to dissolve properly.
- Nitrosol Preparation
- In a large plastic container capable of holding 30 liters of water, pour in 19 liters of water. Add nitrosol and stir it thoroughly.
- Combining the Mixtures
- Pour the contents from the buckets (1, 2, 3, 4, 5) one after another into the container containing the nitrosol. Stir vigorously for 10 to 15 minutes.
- Add Foam Blaster and Formalin
- Incorporate the foam blaster into the mixture, continuing to stir. Then, add 3 tablespoons of formalin as a preservative.
- Color and Perfume
- Mix the desired color in a plastic water bottle and shake it well. Pour the colored water into the mixture and stir. Add the perfume and stir again. Cover the container.
- Allow to Set
- Leave the mixture to set until the next morning. If it becomes too thick, you can add more water to achieve the desired consistency.
That’s it! You’ve successfully created liquid soap.
